Replace Worn Shift Lever Boots

booties booties boots these rubber boots that's the problem okay so what we've got here is dry rotted cracked old rubber boots we'll go ahead and slip one of them off for you so this is the old rubber boot the old rubber boot this is the new rubber boot see a difference see what's happening water is plugging this guy up and the simple simple solution to this problem we might want to put a little bit of grease inside here too so we'll pump a few squirts of grease in with our grease gun got the grease in we're going to rub it in a little bit with our fingers get yourself a rag handy even having the grease on it's really really going to help so we're going to slip that on you want a little bit of grease in that right there on that end because it's got to slip over top of the shifter and you can see how tight that is compared to the old one where'd the old one go look at this it's not getting a seal that is a good seal that is a bad seal so we'll just slip this very simply right over top of the shift knob there are two shifters on this there's one that goes to high and low and start and then one for the gear selector so we'll go ahead and get that installed we'll get you a good close-up