Skip to main content
Stesso

Connect Wiring to EV Charger

0:40
1:28
47.3K views

At 0:40 in

What would you Rate and Price this ChargePoint Electric Vehicle Charger Install? Thoughts

Watch on YouTube

What happens here

Once the electrical cable reaches the EV charger's backplate, the individual wires must be properly connected. The cable typically contains two 'hot' wires (for 240V power), a ground wire, and sometimes a neutral wire (though often not needed for a 240V EV charger). The electrician strips the insulation from the ends of the wires and connects them to the corresponding terminals within the charger's wiring compartment: two hot wires to the 'L1' and 'L2' terminals, and the bare copper ground wire to the ground terminal. The video shows the use of a screwdriver to tighten these terminal connections securely.

Goal: Wire the electrical cable into the EV charger unit

Tools and materials

  • EV Charger — The main unit receiving the electrical connection
  • Screwdriver — Tightening the terminal screws for the electrical connections
  • Wire Strippers — Removing insulation from the electrical wires

What they say

Hide

>> Dude, try to move that. Oh, dude, that is so lit. It can't get any better than that, dude. >> See, that's how you do it. >> That's clean. >> I do clean work. >> Nice. Good stuff, dude. All right, so that's the charge point connection right here. Two hots, ground, two hots ground cable. You got the uh looks like the ethernet or the data

Auto-generated from the video audio.