Skip to main content
Stesso

Prepare Rough Opening and Mark Level

0:24
2:28
9M views

At 0:24 in

What makes a door installation strong 💪 #doors #carpentry #learn

Watch on YouTube

What happens here

Before starting the door installation, ensure your door opening is framed correctly. The rough opening should be 2 1/4 inches wider than the actual door width. Use a level to mark a precise level line on the wall studs at the desired height for the door's head jamb. This line will serve as a reference point for setting the door.

Goal: Ensure the door opening is correctly sized and marked for level installation.

Tools and materials

  • Framing Lumber — To create the rough opening for the door
  • Level Johnson — Making a level mark for the door's head jamb
  • Pencil — Marking the level line
  • Tape Measure — Measuring the rough opening width

What they say

Hide

plate makes this installation strong. So if this door is not tied into the structure or this 2 by 4 isn't attached well, it makes the door installation very weak. Let's see how screws can make for a stronger door install. Frame your opening 2 and 1/4 wider than your door, make a level mark, use shims to plumb your hinge side. Shims are best installed in opposite direction so you can shim flat. If they get stacked, you'll see that this side is thick and this side is thin. And this can twist your jamb. So we'll tack up

Auto-generated from the video audio.