Skip to main content
Stesso

Lifting and Temporarily Bracing Walls

1:15
2:59
4.1M views

At 1:15 in

What keeps your house standing? Learn how to build and how failures are prevented #build #structure

Watch on YouTube

What happens here

Before standing up a wall, screw a temporary side brace onto the wall frame. This brace extends beyond the bottom plate and allows for easier lifting and initial positioning. Once the wall is lifted into a vertical position, a longer diagonal brace can be nailed from the top plate of the wall down to the subfloor or ground, providing temporary stability. This brace can then be adjusted to ensure the wall is plumb and square before final permanent fastening.

Goal: Safely erect and temporarily stabilize wall frames.

Tools and materials

  • Cordless Drill — Screwing in temporary braces
  • Hammer — Nailing off adjustable braces
  • Lumber — Creating temporary supports for wall erection

What they say

Hide

but if you install jacks, give the headers support and mark out your openings. Before we stand up walls, screw in a side brace. >> [snorts] >> So, now when you lift the wall, we can adjust our brace. Nail this off. Now, we'll bump over our plate till we get to our line. Nail it on the joist line. Nails need to go into the bottom plate down into the rim joist. And this connects your bottom plate to the foundation. The sheathing resists

Auto-generated from the video audio.