Skip to main content
Stesso

Lay Out and Install Rafters

9:57
20:03
6.8K views

At 9:57 in

We've Never Built a Roof Like This Before - GLASS HOUSE EP 3

Watch on YouTube

What happens here

To prepare for roof sheathing, establish the rafter layout. Instead of marking the first rafter at 16 inches on center, position it at 15 and 1/4 inches. This ensures that the end of a full 8-foot sheet of plywood will precisely fall in the middle of a rafter, providing optimal support. Subsequent rafters can then be placed at 16 inches on center. Once the layout is confirmed, begin installing the rafters, starting with the first one and working systematically across the roof structure.

Goal: Install all rafters according to the precise layout.

Tools and materials

  • Compressor — Powering the nail gun
  • Measuring Tape — Marking rafter positions
  • Nail Gun — Securing rafters to the main beams
  • Pencil — Marking rafter positions
  • Plywood Sheets — Sheathing the roof

What they say

Hide

[music] >> Whatever. >> All right, we've got our layout here. And I was a little I was a little worried. Huh? Good job. Second guess our guy. Well, I just you know, I didn't know. He I saw him going with the layout. And the important thing when you're doing a rafter layout is instead of going 16 in on center with your first one, you want 16 you really want it to be 15 and a quarter on your first one. So, when we start with a full sheet over here that's obviously going to line up with the end. We want the end of an 8-ft sheet to fall in the middle. So, [music] set your first one 15 and a quarter on layout [music] and then then we go to 16s. Great job, Jose. What? That's good.

Auto-generated from the video audio.