Skip to main content
Stesso

Remove Air Bubbles from Tubing

0:07
1:29
43.9K views

At 0:07 in

Water level

Watch on YouTube

What happens here

It is crucial to remove all air bubbles from the clear tubing, as they can significantly affect the accuracy of the water level. To do this, place one end of the water-filled tubing into a bucket of water and let the other end drain onto the ground. This creates a siphon effect that pulls out air bubbles. Once no more bubbles are visible, pinch or plug the end that was draining onto the ground, then lift both ends. The water will settle.

Goal: Ensure the water level is free of air bubbles for accuracy

Tools and materials

  • Bucket Beech's — To hold one end of the tubing and provide a reservoir for siphoning
  • Clear Tubing — The primary tool for leveling
  • Water Tap water — To fill the bucket for bubble removal

What they say

Hide

How do I know if the bottom of this siding is at the same elevation as that siding? With water. Let's get after it. Step one, fill your hose with water. Your hose is going to have a bunch of bubbles in it and that's going to throw off your level. So, you want to get those bubbles out. Once you have your hose filled with water, put one end in a bucket and drop the other end on the ground and that'll get all your air bubbles out. Okay, now once you have all your air bubbles out, pick your hose up, plug the end, grab your other end. After you got all the bubbles out, you want to make sure that your level's accurate. So, hold them up. It doesn't matter the

Auto-generated from the video audio.