Detatch Handle and Plug In Steamer

to pour into the hole. And got our steamer, the hose hooked up and attached with our steamer attachment. I'm going to be removing this handle right here. It's got a a push button on it. And that push button actually releases the balls. You can't actually pull it off without pushing this button down. So, you can use a pair of gloves, a rag or something to grab that. Just going to push it, lift up, that thing will come off. Now, you got your hole exposed that you can pour your water into. A funnel helps this process a lot better if you got a funnel available. By pouring hot water into this steamer to begin with that it heats up a lot faster. So I'll use as hot as water as you can put in there. And then it's going to take about three of these containers. I've got I put just a little mark on there that says full. That's my own mark that I just want to fill it up to that line. You don't got my steamer all full. Going to put the lid back on. Push the button so it drops back down in. Got my plug. Going to be plugged into a 110 outlet. It does have a breaker on it. So once you plug this thing in, it has an orange light that tells that tells you it's got power. So if this breaker trips for some reason because of water getting in the plug or something, this will trip and you'll just have to push the reset button. We're going to plug it in.