Utilize Electronic Throttle Control (Eco Mode)

do what you need to do tell me about this magic button J so so I'll give it a go I hope I can do it justice here but really when you look at the electronic thr control what that does is it gives you options right you can you have three modes so one if you're just going to transport it very slowly put it in Turtle mode right so that's slow you don't have a lot of speed there the other one I'll talk about is your your your fast speed or your rabbit so then you're you're going Full Throttle all the time think about on your regular machines you hop on it crank the throttle at 100% that's what this is now where the real benefit is here is you can put it into eco mode so when you have it in eco mode what that does is that adjusts the engine RPMs and and the power output to your conditions so if you're let's say in the middle of summer little lawn's a little brown kind of sparse you don't you don't need all that power right you can go along pretty good clip pretty good speed get a good quality of cut at a at a at a lower RPM whereas if you get down into some heavier stuff like let's say you start to get into The Cattails then you're going to need that to ramp up and go into Full Throttle so this takes that away from you to where it does it itself and what that does that saves you a ton on gas and then you also think about you know the sounds on the operator's ears or the vibration on the handles from when you're at Full Throttle versus let's say 2/3 so it's easier on the operator at the same time yeah so he did it he nailed it so really what I thought was was good was it senses the load is the way it was described to me it senses the load that the the blades are under and will automatically adjust the engine RPM to maximize your cut without over adjusting it or under adjusting it it just gets it right to where it's got to be and if the load is gone then it backs off when the load is there it's I it revs it up for you you're not doing anything it just it's it's the magic