Apply Second Coat and Remove Masking

5:48

7:31

1.7M views

At 5:48 in

Tips Painting A Room In 1 Hour. DIY How To Paint Walls Fast.

Watch on YouTube

What happens here

With the first coat and all cut-ins dry, apply the second and final coat of paint to the walls using a 9-inch nap roller and an extension pole. Ensure smooth, even coverage. Once the second coat is fully applied, immediately and carefully pull off all masking tape and paper from the baseboards, door jambs, and window sills while the paint is still slightly wet. This prevents the paint from curing to the tape, which can cause peeling or jagged lines when the tape is removed. After removing all masking, perform any final minor touch-ups if necessary.

Goal: Apply final paint coat and cleanly remove all protective masking

Tools and materials

9-inch Nap Roller — Applying paint to the walls
Extension Pole — Extending the reach of the roller
Paint Tray — Holding paint for the roller

What they say

(694 characters)

Hide

later and we're rolling our second coat and once the second coat is rolled we're going to pull off all of our masking and while doing our cutting c ends we actually used cocking the tape and then did our cut ends just about got this room completed got two coats it's tooken approximately about 1 hour to get this entire room completed cut ends two coats on the walls and all cleaned up just making our final touchup kit leave to the customer and here where we're rolling this wall our cut ends were moving quick enough that our cut ends aren't drying so we could pull off our tape and masking after the second coat is it's about a 14 by 13 Ved ceiling room completed in 1 hour this is Chris the

Auto-generated from the video audio.