Skip to main content

Verify Overcharge Protection and Installation Time

9:29
12:53
450 views

At 9:29 in

The Greatest Trailer Invention I've Seen in Decades

What happens here

After installation, it's crucial to confirm the system's functionality regarding battery protection. The Stillwell Regenerative Braking System incorporates a control box that actively monitors the battery's charge level. Once the trailer battery reaches a full charge, the control box automatically shuts off, effectively preventing any potential damage from overcharging, thereby ensuring battery longevity. Regarding installation efficiency, the lead mechanic conducting the demonstration noted that a first-time installation added approximately 20-30 minutes to a standard brake job. With increased experience, he estimates this additional time would decrease to around 15 minutes per axle, with most of the extra time being dedicated to routing the specific wiring to the control panel and then to the trailer battery.

Goal: Confirm that the installed regenerative braking system includes a mechanism to prevent battery overcharging and assess the total additional time required for this advanced installation.

Tools and materials

  • Control box
  • Trailer battery

What they say

Hide

>> just run it right up to the battery. >> Drew, what about what about overcharging the battery? >> You can't overcharge it. As soon as the battery is fully charged, >> All right. >> the um the control box just completely shuts off. So, it can't overcharge. So, you're not you can't burn your battery. >> burn the battery. >> Can I ask you a question? >> Yeah. >> How about how much extra time do you think it took to do this install versus a normal brake install? >> I'd say maybe around 20 to 30 minutes, maybe. On the high end, 30 minutes. >> And that's because this was your first >> Yeah, my first go round of it. I mean, if I had, you know, got comfortable doing, you know, two, three, four of them, you maybe looking at an extra 15 minutes tops. >> And that was to to run the wire. >> wiring, yeah. That's That's literally about it. >> Just to run the wire up to the control panel and and into the battery. >> Into the battery, yeah. >> That was it. >> Yeah, that's pretty much your only real big extra. I mean, beside, you know, running the other wire over the axle, you know, but I mean, other than that, yeah. >> Okay. >> And that's that was all the only additional work that was to do on top of the traditional brake job. >> We've got it all wired in. I talked to the guy. He said it took uh 30 extra minutes today to do it cuz it was was a new learning curve. And 15 minutes once he gets the system down pat. We've got That included wiring it right into the battery. So, this is where we wire it at this point. >> Yep. >> And then that's pretty much >> That's really it. Yep.

Auto-generated from the video audio.