Skip to main content

Install Regenerative Braking Stator and Rotor

7:52
12:53
450 views

At 7:52 in

The Greatest Trailer Invention I've Seen in Decades

What happens here

Tools and materials

  • Bolts and Nuts
  • Socket Wrench Set

What they say

Hide

>> Well, once you put your backing plate on, you're going to fit your stator over the spindle. In the kit comes with three bolts and four nuts. You put your three bolts through and you put your nut on the back obviously and the main thing with this kit is that you make sure that this your stator is sitting flush against the backing plate. All the wiring gets fished through the back of the backing plate. There's some holes with grommets in them in the back. >> So okay, so point at the wires cuz I can see them right here. Right here. Yep, that's your wires. >> This is it. Yep. >> That's it. So and then your brake wires. >> So you've got two extra wires and three extra >> No, just these two brake wires which is a which is standard for a brake job. This is your for your brakes. >> Yep. >> And then all you got here is your plug and play in. >> Right, that's so that's the two extra wires. >> it. This is it. That's all That's the only thing different. >> extra nuts, right? To hold the stator in place. >> That's correct. Yep. >> And that's the only difference between this and a normal brake job. >> That's it. That's it. >> So show me the control panel.

Auto-generated from the video audio.