Patio Paver Installation and Finishing
2:15
13:43
134.3K views
At 2:15 in
The customer tries to SABOTAGE his OWN job! 4K
What happens here
Once the base is prepared, workers begin laying the interlocking pavers for the patio. This is done by hand, following a specific pattern. Edging restraints are installed along the perimeter to hold the pavers in place. A wet saw (IQMS362 Power Tools) is used to precisely cut pavers to fit edges and corners. After all pavers are laid, polymeric sand (NorthRock) is spread and swept into the paver joints, and then wetted down to harden, locking the pavers together.
Goal: Install concrete pavers and finish the patio surface.
Tools and materials
- Broom Various — Sweeping polymeric sand into paver joints
- Rubber Mallet Various — Tapping pavers into place for a snug fit
- Wet Saw IQMS362 Power Tools — Cutting pavers to fit specific shapes and sizes
- Edging Restraints Various — Securing the perimeter of the paver patio
- Interlocking Concrete Pavers Various — Constructing the patio surface
- Polymeric Sand NorthRock — Filling paver joints to lock them in place and inhibit weed growth
- Water Hose Various — Wetting down polymeric sand