Start Skid Steer and Engage Chipper

460 and we're going to cut up what can be used for firewood here and we're going to chip up what can't be used for firewood and we're going to show you just how awesome this wood chipper is we're going to hop on the skid loader this is planted firmly on the ground right here and what our goal is is to get to 1200 RPM on that RPM gauge okay the hour meter shows it has3 hours on it so let's fire up the Gale contact all right take our brake off now we've got to get this up to 1200 RPM but we don't want to start it at full RPM if we do we can damage the Hydraulics and we can also Dam damage the belt system so this engages the hydraulic system you'll hear it start to hum okay there's a trigger right here I'll pull that trigger and that'll keep it going we are currently at 990 up to 1,000 RPMs on the machine that doesn't matter but we're going to go ahead and turn it up okay as we turn that up we can also see down 12200 2300 RPM on the tractor 1200 RPM on the chipper now we got our machine running everything's good to go we're going to actually just use the electric chainsaw here for this job uh this is not a very big tree make sure we have our bar oil in