Skip to main content

Recognize Black Diamond Markings

0:08
1:06
297.8K views

At 0:08 in

Tape measures

What happens here

Locate the black diamond symbols on the tape measure, which usually appear every 19 3/16 inches. These marks are used for a different layout system, specifically for dividing 8 feet into 5 equal parts (approximately 19.2 inches). This layout is often used for truss or joist placement in certain building applications.

Goal: Understand alternative layout intervals for specific construction needs.

Tools and materials

  • Tape Measure Milwaukee — Identifying alternative layout marks

What they say

Hide

And this isn't the only feature hiding in here. And you've probably noticed every 16 in is marked red, and that makes laying out studs 16 in on center easy. But if you keep going, you'll notice these black diamonds, and those are for a different layout. Those diamonds divide 8 ft into five equal parts, roughly 19 and 3/16 in apart. But what about when you need inside measurement? That's what this measurement's for. It tells you the length of your case. But while we're down here, let's make sure you can actually read this thing. You've got inches,

Auto-generated from the video audio.