Skip to main content

Perform Inside Measurements

0:18
1:06
297.8K views

At 0:18 in

Tape measures

What happens here

When taking an inside measurement (e.g., between two walls or inside a frame), bend the tape measure into the corner and read the measurement at the point where the tape exits the case. Then, add the length of the tape measure's case (which is typically printed on the back or bottom of the case, shown as 3 1/8 inches or 80mm in the video) to this reading for the accurate total inside dimension. Mark the total on the surface with a pencil.

Goal: Measure internal distances precisely by accounting for the tape measure case.

Tools and materials

  • Pencil/Marker — Marking the measurement
  • Tape Measure Milwaukee — Taking inside measurements

What they say

Hide

easy. But if you keep going, you'll notice these black diamonds, and those are for a different layout. Those diamonds divide 8 ft into five equal parts, roughly 19 and 3/16 in apart. But what about when you need inside measurement? That's what this measurement's for. It tells you the length of your case. But while we're down here, let's make sure you can actually read this thing. You've got inches, halves, quarters, eighths, and 16ths. The shorter the line, the smaller the

Auto-generated from the video audio.