Skip to main content
Stesso

Flush System and Check for Leaks

0:41
1:01
405.6K views

At 0:41 in

Super Easy Under Sink Water Filter Install! ​@waterdropfilter.official #waterdropfilter

Watch on YouTube

What happens here

Ensure the kitchen faucet handle is in the 'on' position for cold water. Go back under the sink and slowly turn the handle on the cold water angle stop to allow water to flow into the system. The faucet will initially sputter as air is purged. Let the water run for 5 minutes to flush the new filter. During this time, check all connections for any leaks.

Goal: Prime the filter and verify a leak-free installation.

Tools and materials

  • Timer

What they say

Hide

have about an 8 in gap between the filter housing and the hose that's in that was very easy make sure the faucet's open on the cold side slowly open up the angle stop let your filter charge open up the rest of the way set a timer for 5 minutes while you're testing the filter check for leaks I think my wife's going to be pretty happy thanks water drop

Auto-generated from the video audio.