Super Easy Under Sink Water Filter Install! ​@waterdropfilter.official #waterdropfilter

screw these screws in at the top of each hole line up the holes drop it down next we'll grab our supply lines you got the two sides here that go in the filter got a female adapter and a male adapter grab the hose with the female side connect that to your angle stop come over here to the inlet side push this all the way in tighten the hose back up on your angle stop grab your faucet supply line and the mail pose use a backup and get this tightened and then grab your filter and insert this side of the supply into the outside so when inserted correctly you should have about an 8 in gap between the filter housing and the hose that's in that was very easy make sure the faucet's open on the cold side slowly open up the angle stop let your filter charge open up the rest of the way set a timer for 5 minutes while you're testing the filter check for leaks I think my wife's going to be pretty happy thanks water drop