Skip to main content
Stesso

Connect Inlet Supply Line

0:05
1:01
405.6K views

At 0:05 in

Super Easy Under Sink Water Filter Install! ​@waterdropfilter.official #waterdropfilter

Watch on YouTube

What happens here

Identify the inlet supply line, which has a female adapter on one end. Connect this female adapter to the cold water angle stop valve. Hand-tighten first, then use pliers to give it a final tightening. Take the other end of the hose and firmly push it into the 'IN' port on the filter head.

Goal: Connect the cold water supply to the filter.

Tools and materials

  • Pliers
  • Braided Supply Line

What they say

Hide

screw these screws in at the top of each hole line up the holes drop it down next we'll grab our supply lines you got the two sides here that go in the filter got a female adapter and a male adapter grab the hose with the female side connect that to your angle stop come over here to the inlet side push this all the way in tighten the hose back up on your angle stop grab your faucet supply line and the mail pose use a backup and get this tightened

Auto-generated from the video audio.