Skip to main content

2011 Toyota Highlander Break Light Bulb Change #diy #toyota #helpingothers

1:01
26.2K views

Video by That Fix It Guy

That Fix It Guy

What happens here

This instructional video demonstrates the process of replacing a faulty brake light bulb in a vehicle, specifically a Toyota Highlander. The process involves accessing the tail light assembly from inside the trunk, removing the old bulb, visually inspecting it for faults (a multimeter could be used for further electrical testing, though not shown), inserting a new bulb, and reinstalling the components. The video highlights the need for small hands due to limited access.

Transcript

Hide

so we've only got one of three brake lights at this point we're going to jump in the back here real quick there's going to be a panel over here and a little panel with a vent on it right there pop that cover down it'll just pop out to the side here that's that is the turn signal bulb and we go up over here these two bulbs the top one's going to be the reverse light the bottom one is going to be the brake light you don't have to pull that connection out just grab where that orange part is right there turn the whole thing counterclockwise and then that whole thing eventually will pop out it is a job right but you can see that is definitely bad you can see that it's a little fried right there this is a 7443 bulb these long life ones hopefully this works for us plug it back in place spin it clockwise to pop it back in there get our cover put back on

Auto-generated from the video audio.