Skip to main content
Stesso

Access Tail Light Assembly

0:04
1:01
26.2K views

At 0:04 in

2011 Toyota Highlander Break Light Bulb Change #diy #toyota #helpingothers

Watch on YouTube

What happens here

Open the rear hatch of the vehicle. On the interior trim, locate the small rectangular access panel on the side corresponding to the faulty brake light. Use a pry tool or your fingers to carefully pop out the cover. This reveals the wiring and bulb sockets for the tail light assembly.

Goal: Open the vehicle's trunk or tailgate and locate the interior access panel that covers the back of the tail light assembly. Carefully remove this panel to gain access to the bulb sockets.

Tools and materials

  • Panel pry tool

What they say

Hide

so we've only got one of three brake lights at this point we're going to jump in the back here real quick there's going to be a panel over here and a little panel with a vent on it right there pop that cover down it'll just pop out to the side here that's that is the turn signal bulb and we go up over here these two bulbs the top one's going to be the reverse light the bottom one is

Auto-generated from the video audio.