Install Decking and Make Detail Cuts

as we lay out the decking we let the tail ends overhang the framework at the very end of the job we'll snap a string line and we'll cut all of those at once that'll give us one consistent line down the entire length of the deck now the decking goes down fast but the screwing off takes a long time but before we can even get to that we've got some detail work that we've got to address hit the gap we don't want screw holes going every which way but loose so we snap a string line to keep everything in a straight [Music] line this moisture shield does offer a hidden clipping system but we're not using all one board in fact this entire deck is built up of scraps from different projects that we've accomplished in the past and so we're just face screwing everything and then there's a little trick that we can show you how you can cover that up if you don't like the way it looks so this is the cool little trick to make your deck screws disappear but you've got to use a heat gun and not a torch i tried a torch and trust me it doesn't work but we've still got a few specialty cuts we've got to make before we can finish up the top deck down we got to rip down the board to put matt go on the end so we gotta rip one down over here frankie to get this little sliver what's our overhang plus yeah we're gonna put an eyelash on it or whatever and that'll even everything out so let's do that next to cut the piece we need means we also need a table saw