Skip to main content
Stesso

Reviewing Cabinet Door Hanging Methods

0:01
9:30
110.2K views

At 0:01 in

Spraying Cabinet Doors Hanging. Make Your Own Cabinet Painting Tools!

Watch on YouTube

What happens here

The presenter begins by explaining the importance of efficiently hanging cabinet doors for spraying paint on all four sides, front, and back. He then demonstrates his previous, less professional method, which involved using a wooden stir stick. This stir stick had two screws, either drywall or deck screws, embedded 10 inches apart, slightly protruding. The stick was pressed onto the cabinet door to create two small marks, indicating where 3/32-inch pilot holes would be drilled for cup hooks.

Goal: Understand the need for efficient cabinet door hanging for painting and the limitations of rudimentary methods.

Tools and materials

  • Cabinet Door — The item to be prepared for painting
  • Drywall Screws — To create marking points on the stir stick
  • Wooden Stir Stick — As a makeshift template for marking

What they say

Hide

this paint life tv i'm chris idaho painter in this video i'm going to show you how i made a simple little template for hanging my cabinet doors to spray them as a lot of you know i spray my cabinet doors hanging using cup hooks so i can spray all four sides and front and backs of cabinet doors so i can do them fast and efficiently and make some money so if you want to see how i made this simple little template for setting my cup hooks stay tuned for this video [Applause] [Music] all right here we go i'm going to show you how we go about making the template for uh setting your cup hooks for spraying your doors hanging up on the psdr system i typically uh in the past would use just a stir stick like this i'd measure 10 inches apart and i would screw two either drywall screws or deck screws right into my stir stick and they would protrude out just a little bit and that would be my template for taking and setting on my door whatever side i'm gonna set my cup hooks on and i would press it down that would make two tiny little marks and that's where i'm gonna screw my or drill my three thirty seconds in hole to uh end up putting my cup hooks so that system worked but

Auto-generated from the video audio.