Skip to main content
Stesso

Prepare Template Materials

1:29
9:30
110.2K views

At 1:29 in

Spraying Cabinet Doors Hanging. Make Your Own Cabinet Painting Tools!

Watch on YouTube

What happens here

To construct the improved, professional-looking template, acquire a piece of 1x1 inch aluminum angle iron. This type of angle iron is 1 inch on both sides. The presenter recommends cutting the angle iron to a length of 11 inches. Also, gather some reusable furniture felt slider material, specifically a 1/4 inch thick felt with a self-adhesive backing. This material is typically used on the bottom of furniture to facilitate sliding and prevent floor scratches.

Goal: Collect all necessary components to build the professional template.

Tools and materials

  • 1x1 Inch Aluminum Angle Iron — The main body of the template, cut to 11 inches
  • Reusable Furniture Felt Slider Material

What they say

Hide

is made all right here we go it's a piece of angle iron right here you can go down just to your local hardware store buy a piece of angle iron it comes in a lot of different links now this angle iron this is a one inch angle iron so it's an inch on both sides so get a piece of angle iron you really only need 11 inches cut this thing to 11 inches and then we're going to drill in our pilot holes right here which is going to guide our 3 32 inch bit so we got our angle iron we also put on our angle iron we've got felt and this felt right here you can use it it's basically like what you put on the bottom of furniture to slide around on floors and stuff and it's got a self-adhesive back on it and that uh that um felt itself that is just a quarter inch felt it's tacked on there so we've got our angle iron we've got

Auto-generated from the video audio.