Prepare and Position the Blower Frame

it has um these devices right here this is what's gonna hold this thing in place you definitely want to slip these things in before you do your corners um and tighten them down uh i didn't do it first i just loosened it and slipped it in now so you can have them in you know beforehand if the corner if that's really tight it might be a little bit hard to get them in later on if you are going to um hook up your blower system you know make sure you toss these things in before you lock your corners down now there's two holes on the bottom of it these uh wing nuts right here you're just going to remove the wing nuts and this is what's going to hold this system in place right here so i'm loosening these wing nuts right here now i'm going to set that up inside there and i want i mean you could have this thing set anywhere you know in your booth or um you can have it towards one side but i want it centered in the booth that way it's drawn evenly across the boot puts across the booth i'm going to put my wingnuts back on