Skip to main content
Stesso

Set Up Drill Guide and Bit

0:47
1:37
3.8K views

At 0:47 in

Spetool drill guide

Watch on YouTube

What happens here

Begin by marking the desired hole location on your workpiece (e.g., metal square tubing) and using a center punch to create a small indentation for the drill bit. Take a 1/4 inch drill bit and chuck it into the SpeTool Drill Guide's integrated chuck, securing it tightly with the provided chuck key. Position the drill guide on your workpiece. The pivot pins can be screwed into the bottom of the guide to allow for rotation and precise centering, particularly useful for thinner materials. Finally, adjust the built-in depth gauge to the desired drilling depth and optionally use a C-clamp to secure the drill guide to the workpiece for added stability.

Goal: Prepare the drill bit and position the drill guide accurately on the workpiece.

Tools and materials

  • 1/4 inch Drill Bit — Creating the hole in the workpiece
  • C-Clamp — Securing the drill guide to the workpiece for stability
  • Center Punch — Creating an indentation to prevent drill bit wandering
  • Chuck Key — Tightening the drill bit in the chuck
  • Marking Tool — Marking the center of the hole
  • SpeTool Drill Guide SpeTool — Holding and guiding the drill bit
  • Workpiece — The material being drilled

What they say

Hide

built-in depth gauge, so I can I can set it right here, and it'll stop me there. So, I got my hole marked, punched, taking a quarter-inch drill bit, just chuck it up like you would any drill. Comes with a chuck key. Tighten it down. Go ahead and put this on your workpiece. I got the Speedtool C-clamp down. Remember, when drilling through metal, speed kills sharpness every time. Lock it in one, take your time, let the bit

Auto-generated from the video audio.