Skip to main content
Stesso

Prepare the Joint Compound

1:36
16:30
267.1K views

At 1:36 in

Simple Way To Apply Wall Texture. DIY Sun Valley Texture.

Watch on YouTube

What happens here

The primary material for this texture is USG Sheetrock Topping compound. This product comes pre-mixed in a bucket. To make it easier to work with and ensure proper consistency for texturing, add a small amount of water to the compound. Then, use a mixing paddle attached to a drill to thoroughly stir the mixture until it reaches the desired smooth, workable consistency. The presenters also suggest that while they use pre-mixed, some regions may offer it in a dry form.

Goal: Achieve the correct consistency of joint compound for application.

Tools and materials

  • Cordless Drill — Mixing the joint compound
  • Mixing Paddle — Attaching to the drill to mix the compound
  • Water Tap water — Thinning the joint compound for easier application

What they say

Hide

nice and flat but then we're good to go and we're going to be applying this um topping compound right here and this is USG sheetrock topping anything you want to say about that besides topping John topping joint compound no so what we typically do is we're going to take a sponge or two full of water and we're going to drop that in the bucket and add a little bit of water because you don't want to use it right out of the bucket or right out of the box you want to add a little bit water to make it a little bit easier to work with so we'll add a little bit of water we'll use a paddle and we'll stir that all together and that's the product we're going to be using cuz this comes premixed right this is premixed can you buy it not premixed dry I don't think so I mean maybe sure

Auto-generated from the video audio.