Remove Spare Tire and Mount

so without further ado, let's get at it. So, now that I have that off, I need to get some uh I think these are 21 or 18 or something mm socket. put an impact on there and I take the spare tire off so I can drop this mount off on the inside here. Now, this intelligent rack smooth is super nice. All it does is there's a 2-in receiver on the back of that held on by two bolts. They thread into here and they thread just kind of keep pressure up against this. This just goes on the back of your wheel. Comes through. You bolt it in and now you can hold the traction boards and the jerry can. And all I did for that guys is that this jerry can has a mount for it already. Now what you can do is you can take your high lift jack right here and you can mount it to this. That's what it's made for. There is a mount for it, but I already had a mount for my high lift jack. So what I did was I drilled through my traction boards and I just put the same mount for the high lift and I just put it in through the traction boards. And I definitely like how it looks, but like I said before, it's not staying on this Jeep. So, without further ado, let's get at her. All right, got my impact, got my socket. This is a 3/4 in socket with an extension. Let's get this wheel off