Skip to main content
Stesso

Principles of Effective Sanding: Pressure and Heat

3:22
12:35
3.1K views

At 3:22 in

Sanding Tips | Sand Like A PRO

Watch on YouTube

What happens here

All abrasives function as cutting tools, akin to tiny knives. For optimal performance and finish quality, it's essential to apply minimal pressure, allowing the weight of the sanding tool (whether it's a 3x4 or 5-inch sander) to do the work. Over-application of pressure creates excessive friction and heat. Heat is identified as the 'kryptonite' to sandpaper because it causes the abrasive grains to loosen and detach, leading to shedding, premature wear, and 'loading' (clogging of the abrasive). These issues severely compromise the abrasive's effectiveness and the quality of the finish. The goal is always to 'run cool' to maintain sharp grains and prevent material degradation.

Goal: This step focuses on crucial sanding principles: reducing pressure and managing heat, explaining how excessive heat can degrade abrasives and negatively impact the finish.

Tools and materials

  • Sander (e.g
  • 3x4 or 5-inch)

What they say

Hide

I guess is what it is and all the braces are everybody just needs to keep in mind it's not complicated it's just a cutting tool it's no different than a bandsaw blade it's no different than a router or shaper You're simply taking tons and tons of little knives and you're adhering it to a substrate so when you're cutting things what do you want to do you want to run cool because heat is the biggest detriment heat is the Kryptonite like this to Superman that's what heat is to sandpaper once you heat it up you start loosening the grains and that's when you start getting shedding and that's when you start loading and a lot of things go wrong so in that point if I had to give anybody any tips about sanding especially on what you're customer base is doing my first advice is don't use too much pressure if you're using a three inch by four sander or if you're using a five inch sander just let the weight of that machine do the work and look I get it if I go home and do drywall or something I'm sitting there and I'm I'm going to town at it but I'm creating a lot of friction

Auto-generated from the video audio.