Skip to main content
Stesso

Prepare Hose for Rolling

0:17
3:38
20.4K views

At 0:17 in

Rolling Up A Paint Sprayer Hose. Paint sprayer hacks.

Watch on YouTube

What happens here

The first crucial step before rolling up an airless spray hose is to release all pressure from the gun trigger and the hose itself. If pressure remains, the hose will be significantly more difficult to roll. After ensuring no pressure, stretch the entire length of the hose completely out and lay it flat on the ground. This eliminates any kinks or loops that might complicate the rolling process.

Goal: Before attempting to roll up the airless spray hose, ensure all pressure is released from the gun and the hose. Then, fully extend the hose and lay it flat on the ground to remove any existing kinks or loops.

Tools and materials

  • Airless Spray Gun
  • Airless Spray Hose

What they say

Hide

when you're getting ready to roll up this hose, you want to make sure that you actually release the gun trigger and make sure that there's no pressure in the hose. Because if there's pressure in the O's, it's a lot more difficult to roll off. And I'm going to show you a method that I use to roll it up. And unrolling it is it takes actually flipping the hose back and forth to unroll it. And then I'm going to show you another method or John will actually show you another method of rolling up a hose that it just actually comes all unwound pretty simply without actually flipping the hose. And just to start off, we got the hose. You're going to want to have it completely extended out and flat on the ground. And so there's no kinks or loops in it. And so we've

Auto-generated from the video audio.