Skip to main content
Stesso

Demolish Kitchen Walls and Plan New Layout

1:25
39:51
184K views

At 1:25 in

Rewiring New Electrical in an Old House

Watch on YouTube

What happens here

After the initial assessment, the kitchen undergoes significant demolition, removing old cabinets, countertops, and drywall to expose the wooden studs. This provides a clear framework for the new electrical layout. The planning phase emphasizes the kitchen as the most electricity-intensive area of the house. Specific locations are designated for outlets for a large island/countertop (requiring 20-amp outlets), a dishwasher (its own dedicated circuit with GFCI), a garbage disposal (its own dedicated circuit with GFCI), cooktop range, and refrigerator (its own dedicated circuit). Additional outlets are planned for convenience, such as for a coffee maker. Outlet heights are set at the standard 43 inches from the floor, with those under countertops at 35 inches.

Goal: Demolish the existing kitchen walls to expose the studs, making way for new wiring. Strategically plan the placement of new 20-amp outlets, dedicated circuits, and GFCI protection based on kitchen appliance needs and electrical code.

Tools and materials

  • Cordless Drill
  • Hammer
  • Measuring Tape
  • Respirator Mask
  • Safety Glasses
  • Spade Bit
  • Utility Knife
  • Work Gloves
  • 12/2 Romex Wire
  • 14/2 Romex Wire

What they say

Hide

conveniently might be needed. So we're going to start with the kitchen today because we already demoed it. The kitchen has to have 20 amp uh outlets. Uh for the lights, they could be 15 amp. Uh but for the receptacles, they have to be 20 amps. So the idea here is going to be that we have to plan and strategize everything. And not to mention, certain things have to have GFCIs and some things have to have their own independent circuit. Now, the kitchen is the most overused amount of electricity. You have your appliances, you have your dishes, you have your cooktops. It all drains far more energy than any rest of the house. So, the plan here is going to be we're going to have a big island here, or at least countertops. We're going to put one in the middle over here. It's going to be 4 ft wide. We're going to put one right here just so you can use appliances. We're going to have our dishwasher here. So, we're going to have to have its own independent circuit, GFCI. Then, we're going to have one for the garbage disposal, also GFCI. And then we're going to put one here. Again, appliances. We're going to have our cooktop range right here. And of course, plant couple here. Now, also there's a refrigerator. The refrigerator is going to be over here. We're going to have this big builtout section. The refrigerator has to have its own independent circuit as well. Plus, we'll mount another one in case we want to put like a coffee maker there or something like that. We got a lot to work. I got a spade bit. Let's start drilling and mounting our receptacles.

Auto-generated from the video audio.