Skip to main content
Stesso

Replace Ball and Needle (Using Kit)

4:14
11:27
40.3K views

At 4:14 in

Repacking a Titan RX-Pro. DIY Repair Fast and Easy!

Watch on YouTube

What happens here

If the ball was scratched or damaged during inspection, or if the seat has already been flipped once before, you'll need a new repack kit. The Titan RX-Pro Infinity Packing kit (typically around $20.99) includes a new needle with a new ball, a new seat, and two specialized tools. To replace the needle, drop the black propeller-shaped tool from the kit into the gun's handle end. Turn it until it sits flush. This tool holds the needle's factory adjustment. Then, use the L-shaped Allen wrench-style tool from the kit to unloosen and remove the needle assembly. Carefully take out the old needle and replace it with the new one from the kit. Ensure the new needle drops into place correctly and then re-tighten it using the Allen wrench tool, being careful not to alter the factory set adjustment.

Goal: If the ball or seat is damaged, replace the entire needle assembly and seat using a new repack kit and its specialized tools, being careful to maintain factory adjustments.

Tools and materials

  • L-shaped Allen Wrench Tool
  • Propeller-shaped Tool
  • Titan RX-Pro Infinity Packing Kit

What they say

Hide

gun obviously now if you did feel any scratches scoring divots on that ball i'm going to replace that ball here's my titan repacking kit so the titan repacking kit comes in this kit i've got the kit i purchased today i purchased this kit and it cost me 20.99 for this kit it came with instructions it comes with two tools you've got to have these tools and it comes with a new needle that has a new ball on it don't want to lose that thing it's very small there's no way you can replace this new needle without these two tools now i'm going to take this gun needles exposed this first tool just drops in here and it's just going to drop in place where it falls all the way down i'm going to turn it until it falls into place right there fell into place now i know i can see it's flush right there it looks like a propeller on the airplane that cannot move or it's going to change the adjustment that's set at factory of that needle that's inside there if you turn it one way or turn it the other way it's going to affect the adjustment of the needle and you could get some leaking of your gun after you release the trigger hold that in place it's going to hold in place i'm going to drop this other little allen wrench tool down inside here i'm going to get it on my needle it's set on my needle now i'm going to hold that in place unloosen my needle i can turn it until i feel it comes loose and now there it is there's the end of the needle right there i just take my new one drop it into place it's going to drop in place just like this and then i'll just take and re-tighten it back up and there you go now if anything happens if this moves always keep it a reference of where it

Auto-generated from the video audio.