Inspect and Flip the Seat

1:53

11:27

40.3K views

At 1:53 in

Repacking a Titan RX-Pro. DIY Repair Fast and Easy!

Watch on YouTube

What happens here

Once the diffuser is removed, visually inspect the ball inside for any scratches, pits, divots, or scoring. If the ball appears undamaged, the seat (the small, round, black component) can be 'flipped' for a fresh surface. Use a small, pointed tool (like one from an Apollo gun cleaning kit) to push the seat out from the diffuser. Once removed, flip the seat over so the previously unused side faces outwards, and reinsert it back into the diffuser. This effectively provides a 'new' seat surface without needing a replacement part.

Goal: Inspect the internal ball for damage; if clear, remove the seat from the diffuser, flip it to expose a fresh surface, and reinsert it.

Tools and materials

Small Pointed Tool

What they say

(946 characters)

Hide

trigger after it's moved now you can see the ball inside there i've got my seat inside here the first time you repack this gun if that ball doesn't have any scratches any pits divots or scoring on it then all you got to do is replace the seat i use a little tool right here out of my apollo gun cleaning kit i'm going to punch that diffuser out i'm going to stick my finger up there because if you punch it out it could just fall somewhere on the ground you could lose it i'm going to punch it so it comes out it's going to set on my finger and now i know this is the new side right here i'm going to flip that over and it's going to go right back inside my diffuser right here and i got myself a reek pack kit just like that simple and easy i'm gonna i can set it on here it's gonna go up inside my diffuser just like this i'm gonna put it in there now it's reset down inside there and i've got my new seat inside there doesn't cost you anything

Auto-generated from the video audio.