Skip to main content
Stesso

Remove Diffuser Assembly

1:05
11:27
40.3K views

At 1:05 in

Repacking a Titan RX-Pro. DIY Repair Fast and Easy!

Watch on YouTube

What happens here

Begin by removing the diffuser assembly from the front of the spray gun. This requires a crescent wrench or a suitable alternative. Crucially, as you loosen or tighten this part, you must always pull and hold the spray gun's trigger. Failure to do so could result in scratching the ball or the carbide seat with the needle, potentially causing leaks. After loosening with the wrench, the diffuser can be unscrewed by hand.

Goal: Remove the front diffuser assembly from the spray gun using a wrench, ensuring the trigger is held during the process to protect internal components.

Tools and materials

  • Crescent Wrench

What they say

Hide

repacking of this gun all it is is removing this diffuser off here and hopefully i use the right word um if i didn't then so be it here we go so i'm going to remove this i just need a crescent wrench some type of wrench to remove this off of here i'm just going to get it on there loosen it up it's going to screw right off one thing make sure you pull the trigger on this thing if you don't pull the trigger when you unscrew it or you tighten it up you could scratch the ball on the needle or the seat itself the seat is carbide so you'll probably scratch the ball you would probably scratch it and now it's probably gonna leak again especially if it's brand new and you're just replacing the seat or flipping it so i'm gonna hold the trigger squeeze it in remove this and then i can release the trigger after it's moved now you can see

Auto-generated from the video audio.