Skip to main content
Stesso

Disassemble Rear Handle and Rods

0:19
8:49
27.5K views

At 0:19 in

Repacking A Titan LX80 Airless Paint Gun. Airless Sprayer Hacks.

Watch on YouTube

What happens here

Locate the 3/8-inch nut at the rear of the Titan LX80 paint sprayer gun. Use a screwdriver or appropriate wrench to unscrew this nut. As the nut comes loose, be cautious to prevent it or the attached components from falling. Once the nut is removed, gently pull off the back handle of the gun, exposing two small rods. Remove these rods and set them aside. Although the repair kit includes a new nut, the rods will be reused after cleaning.

Goal: Begin by unscrewing the 3/8-inch nut at the back of the sprayer gun. Carefully remove the back handle and two internal rods, setting them aside to be cleaned and reinstalled later.

Tools and materials

  • Screwdriver
  • Titan LX80 Paint Sprayer
  • Titan Repair Kit (584-045)

What they say

Hide

the gun here. And the back of the gun has got a 3/8 in nut on it. And I'm going to take and I'm going to start off by unscrewing the back of that gun. and the nut off the back. It's going to take several, you know, turns to get that nut off. And you want to be careful when that nut begins to come off. It's going to, you know, fall if you don't be careful. Going to set that. It's just a little tiny nut. We're going to take that little nut, set it aside. The new packing kit comes with a new one, so we don't have to worry about keeping it. And the back of the gun is just going to come off. There's going to be two little rods we don't want to drop and lose because those rod rods are going to be reinstalled. And we'll just clean them off with a rag and then reinstall them. And that's

Auto-generated from the video audio.