Skip to main content
Stesso

Remove Pinion Nut

0:20
1:08
1K views

At 0:20 in

removing pinion and gear from a front dana 60 horrible video if yall need tips leave a comment!

Watch on YouTube

What happens here

As the initial step in the mechanical disassembly, you will need to remove the pinion nut from the back of the differential. The creator specifies that this is an 'inch and 5/16ths nut', indicating the size of the wrench or socket required for removal. While the actual removal is not explicitly shown, it is stated as the first necessary action.

Goal: Detaching the pinion nut from the differential

Tools and materials

  • Pinion Nut — Securing the pinion gear; it needs to be removed
  • Wrench or Socket — To loosen and remove the pinion nut

What they say

Hide

bolt, but there's so many videos online of it already. I don't know if it's necessary. The next video I'll do on these axles will be welding the truss. Anyways, keep this short and simple for you guys. So, pull this out. You're going to want to pull the pinion nut off the back. That's a inch and 5/16 nut. Um, pull it off of there. And then this, just get a pry bar in there. and see it moving.

Auto-generated from the video audio.