Skip to main content
Stesso

Load Transfer and Footing Considerations

1:24
2:39
1.5M views

At 1:24 in

Removing load bearing walls 😬 #carpentry #learn #loadbearing #structure

Watch on YouTube

What happens here

After the header and jack studs are installed, the temporary walls are removed. The video explains how the weight from the joists is now transferred through the new header, down the jack studs, then into the main beam (if present), and finally down to the footings. In some cases, this may necessitate additional steel posts, steel beams, or even larger footings, highlighting the comprehensive nature of structural changes.

Goal: Understand how loads are transferred through the new structure to the footings.

Tools and materials

  • Model House Frame N/A — Demonstrating load transfer
  • Pointer Stick N/A — Highlighting load path
  • Steel Post/Beam — Representing potentially required structural reinforcements

What they say

Hide

hold the weight. Depending on your situation, more jack studs might be required. Now your temp walls get removed. The weight on your joists transfers into your LVL, goes down your jack studs, transfers into your beam, and down into your footings. In some cases, this requires steel post, steel beams, and even bigger footing sizes. The reason you don't remove your top plate is because it handles lateral load. This top plate keeps the header a part of a

Auto-generated from the video audio.