Skip to main content

Remove Blind (Tool-less Method)

3:39
7:52
150.8K views

At 3:39 in

Removing & Installing Cellular Shades. How to install & remove blinds.

What happens here

For cellular blinds designed with a tool-less installation, the removal process is typically quicker and doesn't require any screwdrivers. Begin by fully raising the blind using its operating cords, just as you would for the Phillips head method. Next, locate the small, flexible tabs on the mounting clips, which are usually found on the top rail of the blind. Gently pull these tabs outward, away from the window frame, with your fingers. If you find them stiff or hard to reach, a 5-in-1 tool can be used to carefully pry them open, providing extra leverage. Once the tabs are pulled out, the blind should easily release and come away from the window frame.

Goal: Detaching the blind from its clips using the tool-less mechanism.

Tools and materials

  • 5-in-1 toolTo help pry open mounting clips if needed

What they say

Hide

So, we're going to be removing the set of cellular blinds. So, it doesn't take any tools. And there's a little tiny, if you're looking, there's this little tiny tab that you'll see there. [snorts] And if you take that tab, I can just take my finger and that tab will actually just pull out just like this. And you're going to pull those tabs out. But before you remove the line, you want to raise it all the way up. Just like that. Make sure it's it's not tied to anything. Now, just grab those three tabs. Pull them out. And you're going to rotate them counterclockwise. When you reinstall it, you're going to set it right back in that same position. And then just rotate it clockwise to lock it back in place. And you want to push when you reinstall it. push it up against the ceiling so it catches or up against [snorts] the window trim. So you push it up, it'll catch and lock in place. If you don't push it up, it's hanging down a little bit. It's not going to actually catch the blind. So you're just going to take your blind, stick it up, push it up tight, rotate it, it'll lock. So we're going to just rotate all of them out. Next line just comes out simply with no tools. You just take and line your cords up so they don't get tangled. And then we're going to be spraying all the trim. And this will line itself. I'm

Auto-generated from the video audio.