Reinstall the Blind (Phillips Head Method)

What happens here

To reinstall the blind, first ensure that the small plastic tabs within the mounting brackets are correctly oriented, facing outward (towards you). Take the blind and angle it slightly upward, then slide it back into the mounting brackets. Push it gently but firmly until you feel the ridge on the blind's top part catch onto these tabs. Once you feel it catch and the blind is seated, tighten the three Phillips head screws securely with your screwdriver or drill. If any plastic tab happened to spin around during removal, rotate it so its sharp edge faces the blind, allowing it to correctly engage before seating and tightening.

Goal: Securely reattach the blind to its mounting brackets.