Skip to main content
Stesso

Set Up Airless Sprayer and Apply First Coat

5:42
9:01
103.9K views

At 5:42 in

Refinishing A Front Door. Clear Coating A Door With Urethane.

Watch on YouTube

What happens here

The airless sprayer (Titan 440 Impact) is set up with a Graco Rac X fine finish tip (310 tip) and a 6-inch gun extension for better reach. The clear coat, a satin water-based urethane, is placed in a 5-gallon bucket for stability. The pressure is set to a relatively low setting (around 12 o'clock on the dial) because the clear coat is thin and doesn't require high pressure. Drop cloths are placed on the floor to catch any overspray.

Tools and materials

  • 5-gallon Bucket
  • 6-inch Gun Extension
  • Drop Cloths
  • Graco Rac X Fine Finish Tip (310 tip)
  • Satin Water-Based Urethane Clear Coat
  • Titan 440 Impact Airless Sprayer

What they say

Hide

for me on my first coat. And I'm going to be using a Graco uh Rack X fine finish tip, a 310 tip. So, here we go. Okay, I got some drop cloths on my floor to protect my floor so I don't get any overspray on the floor. And it's just a clear coat, but it'll make the floor shiny. So, um I'm using a satin water-based urethane clear coat. So, I'm going to go ahead and do my first coat. Now I'm going to let that dry, come back and put on another coat. Now my final or my first coat is all dry. I'm going to check it for any rough spots. If there's anything rough, you're just going to sand it out with a really fine sanding sponge. [Music] Okay, my first coat looked pretty good. Now I'm going to spray my second and

Auto-generated from the video audio.