Glue-Up Tabletop Panels

What happens here

Apply a generous amount of wood glue along the prepared edges of the boards, ensuring even coverage using a glue roller or brush. Insert the pre-cut Domino tenons into the mortises on one board, then carefully align the adjacent board and push it onto the tenons, bringing the glued edges together. Once aligned, use multiple clamps (pipe or bar clamps are suitable for wide panels) to apply even pressure across the entire width of the panel. Ensure the clamps are tightened sufficiently to bring the boards flush without excessive squeeze-out. Wipe away any excess glue with a damp cloth before it dries. Repeat this process for all sections of the tabletop and for the smaller panels that will eventually form the table legs, allowing adequate drying time for the glue.

Goal: Apply wood glue to the edges of the prepared boards and insert Domino tenons into the mortises, then clamp the panels tightly to form the tabletop. This is done for both the main tabletop and smaller panels that will form the table legs.