Install New Bicycle Grips with Compressed Air

What happens here

After successfully removing the old grips, it's time to install the new ones. Position the new grip over the end of the handlebar. Insert the air nozzle into the open end of the new grip and aim it towards the handlebar, attempting to create a small gap. While holding the grip in place and applying slight pressure to slide it on, engage the air nozzle to release bursts of compressed air. The air will momentarily expand the grip and create a lubricating layer of air, allowing the grip to slide onto the handlebar. Continue applying air and pushing/twisting until the grip is fully seated. This technique ensures a snug fit once the air dissipates and prevents the 'throttle grip' issue associated with liquid lubricants. Repeat for the other grip. If the air compressor runs out of air, pause to allow it to repressurize before continuing.

Goal: This step details how to install the new bicycle grips onto the handlebars using compressed air to minimize friction and ensure a secure fit.