Skip to main content
Stesso

Masking the Door and Frame

7:29
28:10
216K views

At 7:29 in

Professional Finish with Spray Cans?! How to Get Airless Sprayer Results from a Can!

Watch on YouTube

What happens here

The presenter carefully begins removing the masking paper and tape from the door frame and doorknob. He advises allowing the paint to completely dry before removing the masking to prevent accidental smudges or lifting of the fresh paint. He demonstrates taking care when pulling off the masking, especially the part covering the doorknob, to ensure a clean reveal. He then attaches the security plate and weather strips back onto the door. Finally, he proudly showcases the completed door, highlighting the smooth, durable finish achieved with the Rust-Oleum Turbo Spray System. He reiterates the product's benefits, such as fast application and durability, and notes that the entire process from prep to finish took less than an hour, significantly saving time compared to using an airless sprayer.

Goal: Protect non-paintable areas from overspray and ensure crisp paint lines.

Tools and materials

  • 3M Hand-Masker 3M — Applying masking paper efficiently around the door jamb
  • Blue FrogTape FrogTape — Masking the inside edges of the door frame to prevent bleed-through and create crisp lines
  • Ladder Werner — Reaching higher areas of the door frame for masking
  • Masking Paper — Covering the door jamb and doorknob to protect from overspray

What they say

Hide

bit more i'm gonna get a dry rag wipe it down really quick if you got to do any sanding or rust removal this is the time to do that rust-oleum does have some products rust inhibited primers that will stop rust but this door is in good condition and ready to go so i'm going to start masking this thing off get it all prepped and ready to spray now all the customer was concerned about is spraying the face of the door we're not spraying the inside edge of the door on either side so they only wanted just the face of it sprayed so i'm using frog tape blue frog tape this is like frog tape green but it's the contractor packs so it comes in four packs but has the same polymer that swells up that green frog tape has so i won't get any bleeding underneath the tape i want to have a nice crisp line on the inside edge of this door so i'm just going to get some frog tape on the inside edge here and then on my other edge on the opposite side i'm going to put a strip of frog tape right here inside here to also you know wrap paper around this now i've got my edges all masked now i'm gonna wrap some masking around the door jamb i've never sprayed with one of these spray cans before so i'm not sure about overspray so i'm gonna just to make sure i'm going to give myself two rows of paper around my door jamb being an oil-based paint you can't just if you got overspray you can't just wipe it off with water so i'm going to give myself this side two got a very slight breeze today shouldn't be a problem i'm going to mask off my hinges with tape after i get the perimeter papered off i'm going to put a row of paper on the threshold there's no weather strip so i want to make sure no over spray goes on the opposite side and then i'll drop a drop cloth on the inside of that floor also my door it's not a smooth or glossy door so i don't i don't have to do any sanding it's got a nice porous surface to it that the paint's going to bond really well to so now i'm going to get the high stuff masked off here make sure i don't have any leaks here masking in the wind is always the challenge is the slight breeze today but it's nice because it's a little bit cooler back here today than it was yesterday so the paint will dry a little bit slower gel out hopefully a little bit nicer but with oil-based paints one thing you always have to be concerned about is overspray if it's too windy you don't want to paint one thing you can do here's a little trick is to keep you can tack your paper like this now…

Auto-generated from the video audio.