Masking Removal and Final Review

22:20

28:10

216K views

At 22:20 in

Professional Finish with Spray Cans?! How to Get Airless Sprayer Results from a Can!

Watch on YouTube

What happens here

The presenter carefully begins removing the masking paper and tape from the door frame and doorknob. He advises allowing the paint to completely dry before removing the masking to prevent accidental smudges or lifting of the fresh paint. He demonstrates taking care when pulling off the masking, especially the part covering the doorknob, to ensure a clean reveal. He then attaches the security plate and weather strips back onto the door. Finally, he proudly showcases the completed door, highlighting the smooth, durable finish achieved with the Rust-Oleum Turbo Spray System. He reiterates the product's benefits, such as fast application and durability, and notes that the entire process from prep to finish took less than an hour, significantly saving time compared to using an airless sprayer.

Goal: Reveal the freshly painted door with crisp lines and showcase the final result.

Tools and materials

Cordless Drill — Reattaching the guard plate
Duster Brush — Brushing off any loose debris after masking removal
Guard Plate — Reattaching to the doorknob
Phillips Head Bit — Driving screws
Weather Strips — Reattaching around the door frame

What they say

(2,500 characters)

Hide

bottom edge runs really easy we're going to start pulling this masking off um here just be really careful it's it's only been about i've sprayed four coats and it hasn't even been 20 minutes yet but it's it's getting um see it's it's all tacking up drying extremely fast but i don't want to start pulling my masking and have it flip onto my door so i want to be very very careful what i'm doing here i do got my little plate that i need to paint here wipe this thing off so i do have my little guard plate i sprayed one coat on it just be really careful you can see how fast it comes out there we go now our guard plate is coated also yeah i would typically leave this for about an hour before pulling it but i'm gonna go to be able to show you guys what it looks like i'm gonna pull it right away hopefully they don't do something bad just wad up your paper so there's no paint exposed paint or tape the fun part of painting like the revealing your project it's good i like wearing rubber gloves if you get oil-based paint on your hands then you gotta clean it off with chemicals like mineral spirits and stuff which isn't good for good for your system your body the last thing i want to do is pull off that handle and you really want that to be dry before you pull it off and when i do that i i don't like to have my gloves on when i pull off my handles because i want to know exactly where my fingers are so i don't touch the door it's still a little bit tacky now i'm going to let it completely dry before i attach my security plate and my weather strips and then we'll show you what the door looks like so just give you an idea like you know the amount of time that it you know cut down using a spray can like this i did this door in less than an hour from start to finish from the time i started uh taking it apart prepping it cleaning it to spraying it now you know if i was using an airless spare i would have had to set up the airless sprayer tear down the airless sprayer clean it all up and then i would had the added expense of buying a gallon of mineral spirits to clean up my airless spare also so um once again it's one of those convenient things you know just being able to grab a spray can and once again it's the first time i've ever sprayed with the product never used it before i gave it a test run right here live on video all right there you have it our door is all complete got it done with uh this rust-oleum turbo spray system and once again i chose instead of using a latex…

Auto-generated from the video audio.