Skip to main content
Stesso

Clear Nozzle and Store Spray Can

4:49
5:06
303.4K views

At 4:49 in

Patching a Hole in a Wall and Using Spray Texture. Tips Using Homax spray texture.

Watch on YouTube

What happens here

Once you have completed the texturing and sanding, prepare your spray can for storage. To prevent the nozzle from clogging, turn the can upside down and spray into a 5-gallon bucket or a trash can until only air comes out. This clears any remaining texture from the internal tube and nozzle, ensuring the can will be ready for future use.

Goal: Prevent can nozzle from clogging for future use

Tools and materials

  • 5-gallon Bucket — A container to spray the excess texture into
  • Homax Wall Texture Spray Homax — The can being prepared for storage

What they say

Hide

And now that I'm all done, I don't I don't need my can anymore. This can, if you don't get rid of the texture inside the tube, it's going to ruin the can. So, you always want to turn it upside down and spray it till air comes out of the can. And once air comes out of the can, it's good to go. Put it away from

Auto-generated from the video audio.