Skip to main content
Stesso

Priming with DTM Bonding Primer

1:47
6:32
159.7K views

At 1:47 in

Painting Aluminum Windows & Doors. Spraying Metal Windows. HOW TO PAINT METAL

Watch on YouTube

What happens here

Set up a Graco 440 paint sprayer with DTM (Direct-to-Metal) Bonding Primer (Sherwin-Williams B66 A 50 136-0650 is shown). The video recommends using a Rack X 210 or 310 spray tip and setting the sprayer pressure very low to minimize overspray. Apply a thin, even coat of primer to all exposed metal window frame surfaces. Ensure full coverage, paying attention to corners and edges. Allow the primer to dry according to manufacturer instructions before proceeding.

Goal: Apply an even coat of DTM bonding primer to metal frames

Tools and materials

  • Gloves — Hand protection from paint
  • Graco 440 Paint Sprayer Graco — Applying DTM bonding primer evenly and efficiently
  • Rack X 210 or 310 Spray Tip Graco — Controlling the spray pattern and flow rate for fine finishing
  • Respirator — Protecting respiratory system from paint fumes
  • Safety Glasses — Eye protection during spray painting
  • Sherwin-Williams DTM Bonding Primer — Providing excellent adhesion to metal and creating a uniform base for the topcoat

What they say

Hide

priming with a DTM bonding primer. Got a 440 setup with the DTM bonding primer right here. We're priming with DTM bonding primer using a Rack X 210 tip and the pressure set really low on the 440. Hey, and we're actually masking off the windows right now. and we're spraying them with DTM bonding primer and then we're going to be painting them tricorn black. We've used 9 in paper with 1 in 2020 tape and then 72in 3M masking film and we've masked off up against the rubber and then we've sprayed them with the bonding primer first. We've actually gone and sanded the windows, power washed them. So, we're in the process of priming these windows with DTM bonding primer using a Rackex 310 tip and priming these windows right here. We've already power washed them, sanded them, and power washed them. Thank you for holding. Mory, have you helped? We got the sprayer. It's We're using a 440 set at very low pressure so we don't get a lot of overspray with this primer everywhere. So, it's on low pressure with a 310 tip. We're also using a 10 210 tip on some areas that's a little bit narrower. Heat.

Auto-generated from the video audio.