Seal Masking Tape with Clear Caulk

2:38

4:15

922.2K views

At 2:38 in

Paint Bleeding Through Your Masking Tape? Stop Paint Bleed.

Watch on YouTube

What happens here

To prevent paint from bleeding under the masking tape, apply a thin bead of clear caulk (such as Sherwin Williams 950A) along the tape's edge where it meets the wood trim. Cut a very small hole in the caulk tube nozzle for precise application. After applying the caulk, immediately smooth it out with your finger, pushing it into the tiny gap between the tape and the trim. This action effectively seals the tape, creating a barrier against paint seepage.

Goal: Prevent paint bleed-through under the tape

Tools and materials

Caulk Gun Unspecified — Dispensing caulk from the tube
Clear Caulk — Sealing the edge of the masking tape against the wood trim to prevent paint bleed

What they say

(809 characters)

Hide

here, the tape, if um you don't use a tape like Frog tape, even if you use frog tape, the blade the the paint still can bleed through. But we take uh cocking from Sherwood Williams and it's clear cocking 950A. So if the clear cocking bleeds through the tape, it'll actually dry clear. And so we'll take cut a very small hole and then you're going to take and put a bead of cocking down this tape. Smooth it out with your finger and then paint it and then pull the tape right off immediately while the cocking is still and the paint is still wet. So you run your cocking on your tape. Don't let the cocking dry or when you pull your tape off, it's going to peel the cocking off because it'll bridge from your tape to your wall. So, put your caulking on, wipe, smear it all out so it fills that gap and actually

Auto-generated from the video audio.