Set Up Sprayer Controls and Pressure

to be doing. We start off with the airless sprayer. The airless sprayer is going to typically have three knobs on it or switches. You're going to have an onoff switch. And then you're going to have a pressure switch, which is either going to be a turn dial or a digital readout. And then you're going to have um the prime switch, which will send paint through a prime tube. And you'll start off, make sure the sprayer is in the off position. You want to set your pressure gauge to 3/4 of the way to the end of the dial. So 3/4 full. If it has a digital readout, set your pressure to 2200 PSI to 2,800 PSI. That's typically the pressure we use for all latex products. The 3/4 full throttle position will what you'll use for all latex products also. So once your pressure switch is set, you want to turn your sprayer to the on position.