Prime the Sprayer and Clear Air

sprayer to the on position. And then there there's going to be two tubes. There's going to be an intake tube. This tube's got a screen on it that's actually going to take up the paint. And then there's going to be a prime tube. And this is what's going to get all get rid of all the air out of the line out of the airless sprayer. And you're going to start off by locating the prime valve. And this valve has got two positions. It's got a uh spray position and a prime position. And you want to put that into the prime position till your product starts coming out of the prime tube. And that's going to clear all the air out of the hose and out of the machine. And you'll run this till you see no more air bubbles coming out of the prime tube. Once it starts flowing consistently with paint or your product, you're going to switch it back to the spray position. And it usually should take about 2 to 3 seconds for it to actually stop pumping. Now it's actually completely purged of air and it's completely loaded with paint. the machine itself. Now, your hose itself has still got air or water in it. Now, you can continue to run your hose until you actually start to see paint flow out of it.