Skip to main content
Stesso

Set Sprayer Controls and Initial Pressure

0:44
3:22
174.4K views

At 0:44 in

Operating an airless sprayer. How To Use A Titan Paint Sprayer. Painting tips.

Watch on YouTube

What happens here

Locate the three main operational controls on your airless sprayer: the On/Off switch, the Pressure control (which might be a turn dial or a digital readout), and the Prime switch. Before making any other adjustments, ensure the sprayer's On/Off switch is in the OFF position. Then, set your pressure gauge. If you have a traditional dial, turn it to approximately 3/4 of its maximum setting. For digital readouts, a range of 2200 PSI to 2800 PSI is typically recommended for latex-based paints. Finally, set the prime switch to the 'prime' position, which is crucial for the next step.

Goal: Configure the sprayer's power and pressure settings for initial priming.

Tools and materials

  • Airless Sprayer Unspecified — The main unit with controls

What they say

Hide

to be doing. We start off with the airless sprayer. The airless sprayer is going to typically have three knobs on it or switches. You're going to have an onoff switch. And then you're going to have a pressure switch, which is either going to be a turn dial or a digital readout. And then you're going to have um the prime switch, which will send paint through a prime tube. And you'll start off, make sure the sprayer is in the off position. You want to set your pressure gauge to 3/4 of the way to the end of the dial. So 3/4 full. If it has a digital readout, set your pressure to 2200 PSI to 2,800 PSI. That's typically the pressure we use for all latex products. The 3/4 full throttle position will what you'll use for all latex products also. So once your pressure

Auto-generated from the video audio.