Disassemble K-Line Pods for System Understanding
5:50
24:23
302.6K views
At 5:50 in
Never seen irrigation like this? Pumping from the pond...setup start to finish!
What happens here
The K-Line pods come pre-assembled in their packaging. To understand how they fit together, use a cordless drill with a 1/2-inch socket to unscrew and remove the sprinkler head from inside the pod. This will also allow access to remove the poly pipe section that passes through the pod. The design includes small compartments within the pod to hold loose nuts and bolts during disassembly. The sprinkler head attaches to the poly pipe using a saddle fitting that has a rubber seal and is bolted over a pre-drilled hole in the poly pipe, sealing securely.
Goal: Learn the construction and assembly method of K-Line pods.
Tools and materials
- 1/2-inch Socket — Attaching to the drill to remove bolts
- Cordless Drill DeWalt — Unscrewing bolts on the sprinkler head
- K-Line Irrigation Pods K-Line — Understanding component assembly
- Poly Pipe Section — The section of pipe that passes through the pod, to which the sprinkler attaches
- Saddle Fitting with Rubber Seal — Connecting the sprinkler to the poly pipe
- Sprinkler Head — The water-distributing component of the pod